Cu-PHC is a high purity, low level residual phosphorus, deoxidized copper. It has a very high electrical and thermal conductivity, good welding and soldering properties as well as resistance to hydrogen. It has excellent hot and cold forming properties, and a good corrosion resistance in water and especially in atmosphere (including industrial atmosphere). Cu-PHC has a higher conductivity than Cu-HPC. The alloy is registered US EPA antimicrobial.
Cu-DLP is a phosphorus-deoxidized copper with a limited, medium amount of residual Phosphorus. It has a good electrical conductivity and excellent welding and soldering properties. It can be formed excellent, either hot or cold. The alloy is registered US EPA antimicrobial.
Cu-OFE is a high purity, oxygen free, non phosphorus-deoxidized copper that does not contain in vacuum evaporating elements. It has a very high electrical and thermal conductivity, good welding and excellent soldering properties. It has excellent hot and cold forming properties, and a good corrosion resistance, especially in atmosphere due to a good adherence of the oxide layer. Cu-OFE can be heat treated in reducing atmosphere. The alloy is registered US EPA antimicrobial.
Cu-HCP is a high purity, low level residual phosphorus, deoxidized copper. It has a very high electrical and thermal conductivity, good welding and soldering properties as well as resistance to hydrogen. It has excellent hot and cold forming properties, and a good corrosion resistance in water and especially in atmosphere (including industrial atmosphere). The alloy is registered US EPA antimicrobial.
CuZn36 is the major brass alloy for the cold forming process. Even though brasses with lower Zinc content have better cold forming properties, CuZn36 is the most used alloy. Reasons for this are on the one hand economical due to lower price of Zinc compared to Copper, on the other hand the forming properties of this alloy meet the demand of many applications .
The alloy type is listed in the USA by EPA to have good antimicrobial properties..
CuZn10 has very good cold forming properties and is well suited for e.g. coinage, beating, embossing. This alloy has a higher strength as pure copper. It has good welding and brazing properties as well as a good corrosion resistant and is not fragile to stress corrosion and dezincification. CuZn10 is principally used in jewellery, metal goods, watch industry and in electronic industry for installation parts.We produce qualities with grain sizes below 5 μm if needed. The alloy type is listed in the USA by EPA to have good antimicrobial properties.
CuSn6 provides an excellent combination of strength, cold formability and hardness. It is wear resistant, has good corrosion resistance and soldering properties. Due to its high strength and good spring properties combined with good machining properties it is used for all kind of springs, Bourdon tubes or flexible metal tubes. Special characteristics such as superfine particle size or thermal- mechanical stress relieving improve mechanical properties and provide increased strength and greater malleability. The alloy is registered US EPA antimicrobial.
CuSn5 provides an excellent combination of strength, excellent formability and hardness. It has a good electrical conductivity and corrosion resistance. Soldering and brazing properties are excellent. Special characteristics such as superfine particle size or thermal- mechanical stress relieving improve mechanical properties and provide increased strength and greater malleability. The alloy is registered in the USa by EPA to have good antimicrobial properties.
CuSn4 provides an excellent combination of strength, excellent formability and hardness. It has a good electrical conductivity and corrosion resistance. Soldering and brazing properties are excellent. We offer exceptionally narrow tolerances with regard to chemical composition, dimensional precision and mechanical properties. Special characteristics such as superfine particle size or thermal- mechanical stress relieving improve mechanical properties and provide increased strength and greater malleability. The alloy is registered US EPA antimicrobial.
CuSn4 provides an excellent combination of strength, excellent formability and hardness. It has a good electrical conductivity and corrosion resistance. Soldering and brazing properties are excellent. We offer exceptionally narrow tolerances with regard to chemical composition, dimensional precision and mechanical properties. Special characteristics such as superfine particle size or thermal- mechanical stress relieving improve mechanical properties and provide increased strength and greater malleability. The alloy is registered US EPA antimicrobial.